What is digitizing
Digitizing is the process of converting artwork into a stitch file that can be read by an embroidery machine and interpreted as different stitch types. Is digitizing a one step click the button process? Answer is No !
First, the digitizer must analyze the artwork to see if it should be edited for embroidery. Not all logos that were designed for a print media such as a business card will work well for embroidery. Many designs need to be simplified. In addition to correctly sizing a logo, some elements such as outlining may need to be eliminated and small text may need to be enlarged.
After the artwork has been modified in graphics program, the file is opened in an embroidery program where it is used as a template for creating a stitch file. First, the digitizer must decide how the pathing in the logo will run. The pathing is the sequence of stitches in a design from start to finish. Pathing scan effect how an embroidered design will lie when it is finished. If a design isn't embroidered in the correct sequence, you may have unwanted gaps of fabric or uneven text. The pathing will also effect how long the design will run on the machine during the embroidery process. Although you may not care what the running time is, a shorter, smoother design will cost you less.
Next, the digitizer assigns stitch types to each section of the design based on
what stitches will best represent the artwork. The digitize starts by adding the
underlay stitches. Although you can't see underlay stitches in a finished logo,
having the correct underlay stitches is essential to creating a great
looking logo.
Underlay helps stabilize the fabric to the backing (another essential element in
embroidery), lay down the nap of the fabric so that the remaining stitches have
a smooth surface to embroider on and add density to the design. Not using the
correct underlay can cause the stitches to sink into the fabric or allow the
shirt fabric to show through the design. Although there are only three basic
stitch types: run, satin and fill stitches, there are variations of these stitch
types. For example, fill stitches are used to cover large areas, but, the digitizer
but, the digitizer must decide what type of fill stitch to use, the direction
of them fill and where the fill should start and stop in the design. When making
decisions the the digitizer must consider what type of fabric the logo will be
embroidered on and make appropriate adjustments. Stitches will sink into
fabrics such as polar fleece and lay on the surface of denser fabrics such as
nylon. A logo that was originally digitized for denim, a fabric that allows
stitches to lay on the surface, won't look as good when embroidered on
a pique knit where the stitches sink into the fabric.
Another important aspect of embroidery is the push and pull. A design may move while being embroidered. This will cause some stitches to shrift. This shifting can occur when using bulky fabrics, long stitches, large areas of thread and a tight bobbin thread. A digitizer must account for the possible effects of push and pull on a design and make adjustments to compensate.
Although many left chest business logos are fairly easy to digitize,
designs with fine detail, small text and lots of color changes require
more set-up time. Digitizing is a careful process that requires time
and experience to be performed correctly. The Digitizer must know
how the stitches he or she sees in his embroidery software will
embroidery on different fabrics. A well digitized design will enhance
your logo and we provide quality digitizing in house.